Announcement

Collapse
No announcement yet.

Clutch Service and Balancing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Clutch Service and Balancing

    http://www.cascadecp.net
    Now is the time to take action on your Clutch's. We have expanded to include the Skidoo P-Drive and all the RZR's and X-3 SXS models. We also can do a complete clutch alignment (with shims) on your G-4 and TRA's back to 2008. Video of processhttps://www.youtube.com/watch?v=ZFd8btzO0ro&t=2s Get them serviced during the off season and avoid the September, October rush. We can inspect your clutch's (Primary and Secondary) and make suggestions on springs, weights and helix's. Or if you have specific requirements we can modify your clutches to do exactly what you want them to do.
    Most clutch's are at least 5-7 grams out of balance (even brand new out of the box). 7 gram-in of unbalance is like adding a 112 lb weight to one side of your clutch when it is turning 8000 RPM. You feel a vibration, your crank shaft and bearings take a pounding 8000 times a minute. We can correct this problem with our state of the art dual plane balancing equipment. We mount your clutch on a mandrel that matches the crank shaft of your motor. This is a very important step in the process.


    Drop by and visit our site. If you have any questions feel free to give us a call.


    http://www.cascadecp.net
    Last edited by dlynn; 09-11-19, 07:44 PM.

    #2
    Dave is a great guy to deal with! Very reasonable, fair, great product and has some state of the art equipment. I wouldn't hesitate one bit....
    Wes Adams
    Mr.Triple
    Gotta have a Triple in the crowd!
    2000 Yamaha 700 Mountain Max
    2000 Polaris 1200 Triple Mod Sled
    2001 Polaris 600 Edge X
    2001 Polaris 500 SP
    ***2005 RMK Mod Sled, Triple, Homemade Tunnel***

    http://www.hillsideauto.org/

    www.facebook.com/HillsideAuto1

    http://www.amsoil.com/index.aspx?zo=1987784

    Comment


      #3
      Originally posted by Ford428CJ View Post
      Dave is a great guy to deal with! Very reasonable, fair, great product and has some state of the art equipment. I wouldn't hesitate one bit....
      I agree, very good at what he does and always willing to help. Stayed up very late one night no fix my wife's secondary, that I destroyed the day before we left for our new years trip.

      Comment

      Working...
      X